Please use this identifier to cite or link to this item:
https://cuir.car.chula.ac.th/handle/123456789/26622
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | Varawut Tangpasuthadol | - |
dc.contributor.advisor | Amarawan Intasiri | - |
dc.contributor.author | Jirawan Siramanont | - |
dc.contributor.other | Chulalongkorn University. Faculty of Science | - |
dc.date.accessioned | 2012-11-28T08:41:16Z | - |
dc.date.available | 2012-11-28T08:41:16Z | - |
dc.date.issued | 2005 | - |
dc.identifier.isbn | 9741422393 | - |
dc.identifier.uri | http://cuir.car.chula.ac.th/handle/123456789/26622 | - |
dc.description | Thesis (M.Sc.)--Chulalongkorn University, 2005 | en |
dc.description.abstract | Alkyltriethoxysilanes and tetraethoxysilane (TEOS) were used as precursors to generate silica in concentrated natural rubber latex. Both silanes were mixed with the concentrated latex incorporated 0.7% NH3, and heated at 50°C for 5 days in order to complete the sol-gel process of both silanes. Four types of ethoxysilanes ; tetraethoxysilane (TEOS), vinyltriethoxysilane (VTOS), ethyltriethoxysilane (ETOS), and i-butyltriethoxysilane (BTOS), were studied. The conversion of silane to silica particles inside the rubber depended on size and polarity of the alkyl group in the alkyltriethoxysilane. The influences of various molar ratios between alkyl-triethoxysilane and TEOS on the morphology and mechanical properties of the composites were investigated. The modified silica particles obtained from the mixed silanes were well dispersed in the NR matrix as observed by SEM and TEM. Silicon-29 solid-state NMR technique was also used to analyze the chemical structures of the in siru generated silica. For sulfur-cured composites, the use of VTOS/TEOS (5, l0 and 20 mol% VTOS) resulted in an increase of tensile modulus, tensile strength, and tear strength over to the composite prepared from only TEOS. The mechanical properties results lead to a conclusion that the vinyl group from VTOS most probably participates in the sulfur vulcanization. Cure characteristic and swelling behavior in toluene were also investigated. | - |
dc.description.abstractalternative | ใช้แอลคิลไทรเอทอกซีไซเลนและเททระเอทอกซีไซเลน (TEOS) เป็นสารตั้งต้นในการสร้างซิลิกาในน้ำยางธรรมชาติโดยผสมไซเลนทั้งสองชนิดเข้ากับน้ำยางข้นซึ่งมีแอมโมเนียอยู่ร้อยละ 0.7 และให้ความร้อนจนถึงอุณหภูมิ 50 องศาเซลเซียส เป็นเวลา 5 วันเพื่อให้ไซเลนทั้งสองชนิดเกิดกระบวนการโซล-เจลอย่างสมบูรณ์ เอทอกซีไซเลนสี่ชนิดที่นำมาศึกษาคือ เททระเอทอกซีไซเลน (TEOS), ไวนิลไทรเอทอกซีไซเลน (VTOS), เอทิลไทรเอทอกซีไซเลน (ETOS), ไอโซบิวทิลไทรเอทอกซีไซเลน (BTOS) พบว่า การเปลี่ยนไซเลนไปเป็นซิลิกาภายในยางนั้นขึ้นกับขนาดและความมีขั้วของหมู่แอลคิลในแอลคิลไทรเอทอกซีไซเลน ได้ศึกษาผลของอัตราส่วนโดยโมลระหว่างแอลคิลไทรเอทอกซีไซเลน TEOS ต่อสมบัติทางด้านสัณฐานวิทยา และสมบัติเชิงกลของคอมโพสิตอนุภาคซิลิกาดัดแปลงที่ได้จากไซเลนผสมนี้กระจายตัวดีในเนื้อยางโดยการสังเกตด้วยเทคนิค SEM และ TEM ยังได้วิเคราะห์โครงสร้างทางเคมีของซิลิกาที่ถูกสร้างขึ้นภายในนี้ด้วยเทคนิคเอ็นเอ็มอาร์แบบวัฏภาคของแข็งของซิลิกอน-29 เมื่อวิเคราะห์ค่าเทนไซล์มอดุลัส ค่าแรงเทนไซล์ และค่าการทนแรงฉีกขาดของคอมโพสิตที่คงรูปด้วยกำมะถันแล้วพบว่า การใช้ VTOS/TEOS (ปริมาณ VTOS เป็นร้อยละ 5, 10 และ 20 โดยโมล) ให้ค่าเหล่านี้สูงขึ้นกว่าคอมโพสิตที่ใช้ TEOS เพียงชนิดเดียว จากผลของสมบัติเชิงกลนี้ทำให้สรุปได้ว่าหมู่ไวนิลจาก VTOS น่าจะมีส่วนร่วมในกระบวนการวัลคาไนเซชัน นอกจากนี้ยังได้ตรวจสอบลักษณะเฉพาะของการคงรูปและการบวมตัวในโทลูอีนด้วย | - |
dc.format.extent | 3428440 bytes | - |
dc.format.extent | 978199 bytes | - |
dc.format.extent | 6762048 bytes | - |
dc.format.extent | 2114008 bytes | - |
dc.format.extent | 6536410 bytes | - |
dc.format.extent | 640915 bytes | - |
dc.format.extent | 2333837 bytes | - |
dc.format.mimetype | application/pdf | - |
dc.format.mimetype | application/pdf | - |
dc.format.mimetype | application/pdf | - |
dc.format.mimetype | application/pdf | - |
dc.format.mimetype | application/pdf | - |
dc.format.mimetype | application/pdf | - |
dc.format.mimetype | application/pdf | - |
dc.language.iso | en | es |
dc.relation.uri | http://doi.org/10.14457/CU.the.2005.1878 | - |
dc.rights | Chulalongkorn University | en |
dc.subject | Natural rubber | - |
dc.subject | Tetraethoxysilane | - |
dc.subject | Silica | - |
dc.subject | Sol-gel process | - |
dc.subject | Alkyltriethoxysilane | - |
dc.subject | Rubber -- Reinforcement | - |
dc.title | Reinforcement of natural rubber by silica generated from sol-gel process of silanes in latex | en |
dc.title.alternative | การเสริมแรงยางธรรมชาติด้วยซิลิกาที่ได้จากกระบวนการโซล-เจลของไซเลนในน้ำยาง | en |
dc.type | Thesis | es |
dc.degree.name | Master of Science | es |
dc.degree.level | Master's Degree | es |
dc.degree.discipline | Petrochemistry and Polymer Science | es |
dc.degree.grantor | Chulalongkorn University | en |
dc.identifier.DOI | 10.14457/CU.the.2005.1878 | - |
Appears in Collections: | Sci - Theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Jirawan_si_front.pdf | 3.35 MB | Adobe PDF | View/Open | |
Jirawan_si_ch1.pdf | 955.27 kB | Adobe PDF | View/Open | |
Jirawan_si_ch2.pdf | 6.6 MB | Adobe PDF | View/Open | |
Jirawan_si_ch3.pdf | 2.06 MB | Adobe PDF | View/Open | |
Jirawan_si_ch4.pdf | 6.38 MB | Adobe PDF | View/Open | |
Jirawan_si_ch5.pdf | 625.89 kB | Adobe PDF | View/Open | |
Jirawan_si_back.pdf | 2.28 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.