Please use this identifier to cite or link to this item: https://cuir.car.chula.ac.th/handle/123456789/26626
Title: แนวทางการสร้างแบบประเมินประสิทธิภาพในการประหยัดพลังงานของหลังคาอาคารในภูมิอากาศเขตร้อนชื้น
Other Titles: An approach to formulate energy conservation index for roof of building in hot-humid climate
Authors: สราวุธ จิตต์เจริญ
Advisors: วรสัณฑ์ บูรณากาญจน์
สุนทร บุญญาธิการ
Other author: จุฬาลงกรณ์มหาวิทยาลัย. คณะสถาปัตยกรรมศาสตร์
Issue Date: 2546
Publisher: จุฬาลงกรณ์มหาวิทยาลัย
Abstract: หลังคามีอิทธิพลต่อภาระการทำความเย็นในปริมาณที่สูงมากในอาคารปรับอากาศ ซึ่งส่งผลกระทบโดย ตรงต่อการใช้พลังงานของอาคาร การวิจัยนี้มีวัตถุประสงค์เพื่อหาตัวแปรที่มีอิทธิพลต่อการใช้พลังงานในอาคาร ของหลังคา และนำมาสร้างเป็นดัชนีในการประเมินประสิทธิภาพของหลังคาอาคารบ้านพักอาศัยในกรณีที่มีการ ปรับอากาศ การวิจัยนี้ทำการศึกษาอิทธิพลของตัวแปรที่เกี่ยวกับพฤติกรรมการถ่ายเทความร้อนผ่านทางหลังคา และ ตัวแปรที่มิอิทธิพลต่อภาระการทำความเย็นของอาคารปรับอากาศ โดยเลือกหลังคาที่มีการใช้กันอยู่ทั่วไปมาเป็น กรณีศึกษา นำผลที่ได้จากการวิเคราะห์มาสร้างเป็น 5 ระดับคะแนน โดยหลังคาที่มีศักยภาพในการประหยัดพลัง งานต่ำสุดมีค่าระดับคะแนน 1 จนถึงหลังคาที่มีศักยภาพในการประหยัดพลังงานสูงสุดมีค่าระดับคะแนน 5 ผล จากการวิเคราะห์ค่าน้ำหนักของตัวแปรที่มิอิทธิพลต่อภาระการทำความเย็นที่เกิดจากหลังคามากที่สุด คือ ค่า สัมประสิทธิ์การถ่ายเทความร้อน รองลงมา คือ ลักษณะโครงสร้างของหลังคา และการติดตังระบบฉนวนกันความ ร้อนในช่องใต้หลังคา ตามลำดับ ผลจากการทดสอบแบบประเมินประสิทธิภาพในการประหยัดพลังงานของหลังคากับบ้านพักอาศัยทั่วไป พบว่า มีค่าภาระการทำความเย็นต่อพื้นที่ใช้สอยอยู่ระหว่าง 21.96 Btu/hr-ft² ถึง 26.32 Btu/hr-ft² มีค่าระดับ คะแนนตั้งแต่ 3 ถึงระดับคะแนน 1 ซึ่งถือว่ามีประสิทธิภาพในการประหยัดพลังงานต่ำ ส่วนหลังคาของบ้านพักอาศัยที่คำนึงถึงการเลือกใช้วัสดุมุงหลังคา และการออกแบบเพื่อเน้นการประหยัดพลังงาน พบว่ามีค่าภาระการทำ ความเย็นต่อพื้นที่ใช้สอยอยู่ที่ 1.20 Btu/hr-ft² ถึงว่ามีประสิทธิภาพในการประหยัดพลังงานสูงสุด ผลที่ได้จากการทดสอบแบบประเมินที่สร้างขึ้นกับอาคารบ้านพักอาศัยดังกล่าว พบว่าหลังคาที่ดีที่สุด คือหลังคาที่มีค่าสัมประสิทธิ์การถ่ายเทความร้อนต่ำ มีการติดตั้งฝ้าเพดานกับฉนวนกันความร้อนเพื่อป้องกันการ แผ่รังสีความร้อนอย่างถูกวิธีและมีอัตราส่วนพื้นที่หลังคาต่อพื้นที่ใช้สอยต่ำ ดังนั้นในการเลือกใช้หลังคาของอาคาร ให้เหมาะสมกับประเทศไทยจำเป็นต้องเลือกใช้วัสดุที่มีค่าความต้านทานความร้อนสูง และการออกแบบติดตั้ง ระบบฉนวนกันความร้อนที่ถูกต้อง ก็จะช่วยในการลดภาระการทำความเย็นให้กับระบบปรับอากาศลงได้
Other Abstract: A significant portion of cooling load in air-conditioned buildings in Thailand is due to roofing construction and materials, which affect directly on energy consumption. This research was aimed at studying variables of residential roofing that influent energy consumption of residences. These would lead to weighting of each variable, then formulating indices for efficiency evaluation of the residence roof in air-conditioned buildings. The research procedure started at studying the influence of variables on heat transfer through residential roofs and other cooling load factors. Typical roof constructions were evaluated to conduct evaluation scale of energy conservation index. Scale 1 to 5 were assigned. Level 1 indicates the lowest energy efficiency while level 5 means the highest energy saving potential. It was found that heat transfer coefficient (U-Value) was the most significant factor of cooling load from roof while roof construction and attic insulation were less significant. The proposed energy conservation index for roof was tasted on two samples. It was found that the cooling load values in typical roofs ranged from were 21.96 Btu/h-ft² to 26.32 Btu/h-ft², the ranking from no. 3 to no. 1, which had low potential for energy conservation. Meanwhile, The design of a roof with energy concern was found that the cooling load were at 1.20 Btu/h-ft², the ranking was no. 5, which had the highest potential for energy conservation. It is concluded that low heat transfer coefficient (U-Value), proper insulation, a presence of ceiling, and the minimum ratio of roofing area to useable area were essential for designing air - conditioned buildings in terms of cooling load reduction. Thus, roof design for energy saving in Thailand should use high heat resistance materials and proper heat prevention system.
Description: วิทยานิพนธ์ (สถ.ม.)--จุฬาลงกรณ์มหาวิทยาลัย, 2546
Degree Name: สถาปัตยกรรมศาสตรมหาบัณฑิต
Degree Level: ปริญญาโท
Degree Discipline: สถาปัตยกรรม
URI: http://cuir.car.chula.ac.th/handle/123456789/26626
ISBN: 9741752474
Type: Thesis
Appears in Collections:Arch - Theses

Files in This Item:
File Description SizeFormat 
Saravut_ch_front.pdf3.18 MBAdobe PDFView/Open
Saravut_ch_ch1.pdf3.69 MBAdobe PDFView/Open
Saravut_ch_ch2.pdf9.27 MBAdobe PDFView/Open
Saravut_ch_ch3.pdf19.83 MBAdobe PDFView/Open
Saravut_ch_ch4.pdf11.58 MBAdobe PDFView/Open
Saravut_ch_ch5.pdf2.19 MBAdobe PDFView/Open
Saravut_ch_back.pdf18.79 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.